Winterhalter

MTR Series with new irt-rinse

Unleash large savings potentials.

The optimised rinse system of the MT Series lowers fresh water consumption by 25-30 %.
For this purpose, the number of rinse jets at a MTR was reduced from 10 to 7. The lower rinse arm swings perpendicular to the pass-through direction of the dishes. This swinging motion guarantees that the dishes are sprayed over the whole width of the rack. The upper rinse is achieved over the whole width of the rack with the help of four jets.
The reduced number of jets considerably lowers the rinse water volume with, as usual, excellent results.

  • Large water savings
  • Reduced operating expenses
  • Reduced connection rating
  • Best washing procedure in accordance with DIN 10510
Model   Rinse water consumption standard* Rinse water consumption with irt-rinse*
MTR 2-115 [l/h] 260 190
MTR 2-130 [l/h] 260 190
MTR 3-155 [l/h] 260 190
MTR 3-170 [l/h] 260 190
MTR 3-210 [l/h] 280 190
MTR 4-210 [l/h] 280 190
MTR 4-240 [l/h] 300 210
MTR 4-250 [l/h] 320 220
MTR 4-300 [l/h] 360 250

* Under ideal conditions. The fresh water consumption depends on the on-site conditions. The precise adjustment takes place during commissioning.


EnlargeMTR

Consulting

For personal consulting:
Ask your specialist dealer for Winterhalter products. Or you can contact your local Winterhalter expert.
Just in case:

Winterhalter Sales
Tel. +49 (0)7542 / 402-157
Fax +49 (0)7542 / 402-432

Requesting brochures

by E-Mail:
E-Mail enquiry

Download:
irt Brochure (680 KB)

For reading or printing Adobe Acrobat Reader is required.
 Bookmark        Recommend this site         Printable version Top