Multi-Tank Rack Conveyors
MTR series

Features

    Base filtration

    Food debris is caught in a removable surface sieve and in the pump suction sieve. In addition, the tried and tested Mediamat permanently removes fine soiling such as coffee grounds.

    • Continually clean wash water
    • Always good wash results
    • Removable surface sieve

    Self-cleaning programme

    Rotating nozzles on the cover automatically clean the interior with fresh water. After cleaning, the tank water completely empties.

    • Maximum hygiene
    • Clear reduction of manual cleaning time

    Rack activated control zone

    The rack activation ensures that pump operation, water intake and drying only occur when the rack reaches a specific zone within the machine.

    • Minimised resource consumption (energy, water, detergent, rinse aid)
    • Reduced operating costs

    Hygienic Design

    A carefully engineered combination of perfect hygiene and low cleaning costs.

    • Smooth, seamless interior
    • 180° swivelling hygiene doors
    • Deep-drawn hygienic tank
    • Self-cleaning

    Continual rack conveyor

    A special drive system ensures the continuous motion of the dishes through the individual zones.

    • Specially developed drive system for even contact with the wash water
    • Continually perfect wash results

    Touch screen

    The touch screen is the operating, communication and control platform for washing staff, the kitchen chef and the service technician.

    • Intuitive, language-neutral operation just by touching an icon
    • Optical and acoustical signals will inform you about washing progress and the status of the machine.
    • Error messages and some independent error alleviation.
    • PIN protected chef level. Hygiene and operation relevant data always queriable.
    • Monitoring of external water treatment

    Start interactive touchscreen application now

  • Touch screen
  • Continual rack conveyor
  • Hygienic Design
  • Rack activated control zone
  • Self-cleaning programme
  • Base filtration
Options

    Data interfaces

    A data interface (RS 422, RS 232), can share hygiene information with a computer so relevant operating data can be read and documented.

    • Seamless data analysis

    Detergent saving device

    Available with detergent saving equipment which reduces detergent consumption and operating costs.

    • Reduction of operating costs thanks to reduced detergent use

    Outlet roller table

    The outlet roller table increases the output area for freshly washed racks. The dishes can dry properly and output is increased.

    • Optimal drying results
    • Increased output capacity

    Outlet corner conveyor

    For optimal use of the room, the MTR can be equipped with an optional 90° or 180° outlet corner conveyor.

    • Optimal use of space

    Corner intake

    For optimal use of the room, the MTR can be equipped with an optional corner intake.

    • Optimal use of space
    • Ergonomic work process

    Energy

    The exhaust air heat exchanger draws energy contianed in the waste steam and uses it to heat the cold inlet water - so valuable resources are saved. At the same time, cooled, dry air is released into the room.

    • Significant reduction of operating costs
    • Improved room climate
    • Reduced total connection value

    Heat pumps

    Even more energy efficient than exhaust heat recovery system Energy are the Climate and Climate+ heat pumps.

    • Energy savings with the Climate heat pump: up to 14 kWh per hour
    • Energy savings with the Climate+ heat pump: up to 18 kWh per hour

    Note: Fluorinated greenhouse gases contained in a hermetically sealed device; refrigerant R134a, 1.20 kg (Climate) / 2.60 kg (Climate+), 1.72 tonnes (Climate) / 3.72 tonnes (Climate+) of CO2 equivalent; greenhouse gas potential 1430

    Glass Program

    A special program which is optimally calibrated to the special requirements of washing glasses.

    • Wash process specially optimised for glass washing.
    • Rinse with osmosis water is activated (if present)
  • Energy
  • Heat pumps
  • Glass Program
  • Corner intake
  • Outlet corner conveyor
  • Outlet roller table
  • Detergent saving device
  • Data interfaces
Accessories

    Wash racks

    A variety of baskets are available for washing small items, glasses or specialist items

    • Optimal loading of wash items
    • Perfect wash and drying results

    Input table and output roller conveyors

    The input table an output roller conveyors support an organised and ergonomic work process.

    • Optimal adaptation to the spatial conditions.
    • Ergonomic work process

    Dirties sorting station

    A sorting area can be specifically designed to cope with the return of dirty items from your foodservice operation.  They can be designed to suit your wash items, volume or even the type of food being served.

    • Optimisation of the work flow
    • Tasks become more ergonomic
    • Optimal use of space
  • Input table and output roller conveyors
  • Dirties sorting station
  • Wash racks
Downloads
Personal Consultation

For an individual consultation or if you have any questions, please contact

  • your local Winterhalter subsidiary

  • the Winterhalter headquaters
    Phone +49 7542 402-5327
    E-Ma5zyqilq4 (info@svawinterhalter.biz3dee)

Multi-tank rack conveyor machines
Large scale efficiency and hygiene

The MTR series ensures a high rack yield for hotels and foodservice environments whilst guaranteeing hygiene and perfect wash results.

Depending on the wash items and the space available, the machine can be configured in a modular manner. The continual rack conveyor system provides an even transport speed for the items to be washed. This ensures hygienic cleaning.

The optimised rinse system with minimal water consumption and the rack activated control zones also ensure economical consumption and low operating costs.

Complementary products

Water treatment | Chemicals | Racks